Service & Statutory Inspection


Service & Statutory inspection of elevators and lifts

As a manufacturer of elevators and lifts with more than 35 years of experience, we have extensive experience and specialist knowledge within elevators and lifts, and the maintenance required to ensure a long and uninterrupted service life.

We therefore recommend a service contract that includes both statutory inspections and maintenance, as this will extend the life of the system and minimize costs. By signing a service contract for your newly installed system with us, both safety inspections and maintenance are included.

Worth knowing about statutory safety inspections

It is a legal requirement from the Danish Working Environment Authority that elevators and lifts for people and goods must have statutory safety inspections carried out by a certified expert within different intervals depending on the product and its use. This means that the frequency of your statutory safety inspection depends on whether it is a passenger or goods elevator, lifting platform, stairlift, as well as the height of the lift and the frequency of its use. If you do not have a service agreement, you run the risk of a fine from the Danish Working Environment Authority, that general maintenance is not carried out and in the long run it will end up in a repair cost that could have been avoided, or in the worst case an accident. You can read more about the requirements for the frequency of your product's safety inspection under Arbejdstilsynets Bekendtgørelse nr. 461 af 23 Maj 2016, bilag 2 her


We would like to point out that the Danish Working Environment Authority's legal requirements only include safety inspections, but that HYDRO-CON as a manufacturer recommends that you sign a service agreement that includes safety inspections and general maintenance on a minimum quarterly basis.

Service Quality Management System Certificate

HYDRO-CON's service and repair departments have been quality certified for more than 10 years. For you as a customer, this is a seal of approval that we maintain a consistently high level of quality in handling, safety and that we take responsibility for the way we do things.

Certification is valid for -ISO9001:2015+AT-Bek 461:2016 §12.

Bruun Inspection is a certification body that assesses and checks companies' management systems and business activities and certifies them if they meet the requirements.

We are continuously audited and have our certification renewed.

Good service is a high priority for us

Regardless of whether you have a service agreement directly through us or our partner, you are guaranteed good service. Our products are considered to be of high quality, which is why it is a high priority for us that our customers experience that the service level matches the product. With a service inspection agreement with us, you are sure that our service technicians' most important task is to ensure that our customers' systems comply with applicable safety standards, have optimal uptime, operational safety, and a long product life with high performance.


We are ISO 9001 certified to carry out statutory inspections on all our own manufactured systems such as elevators, platform lifts, freight lifts, stair lifts and disabled lifts.

Our service agreements mean that you as a customer do not have to spend time coordinating and keeping track of periodic statutory inspections, we monitor and hold the required inspections set by the Danish Working Environment Authority. In addition, we provide maintenance of the customer's system, delivery and lubrication with necessary lubricants, and report to the customer on any errors and deficiencies found during the inspection.

For existing service customers

For your information, HYDRO-CON Elevator ApS (CVR 44503158) continues all active service contracts as of February 2024.


The transfer is made as part of the original HYDRO-CON (CVR 27762891).


All terms, conditions and conditions remain unchanged.

Contact us for questions or further clarification

Service agreement with HYDRO-CON

We offer service agreements that, among other things, comply with the statutory safety inspections on our own systems only. This is because we naturally have the greatest expertise in systems we have produced ourselves. We have a permanent nationwide partner who we can rely on to deliver a service inspection that meets our high standards.

Our partners receive a comprehensive product specification along with each service agreement we refer them to, so that you as a customer can trust that your elevator, platform lift, freight lift, stair lift, or handicap lift runs smoothly and safely in accordance with the Danish Working Environment Authority's regulations.

Avoid expensive repairs

By signing a service contract that includes maintenance. Our products have an average lifespan of 25+ years, which is longer than the industry standard. But just like your car, we strongly recommend that you, in addition to complying with the statutory service inspections, secure a service contract with maintenance to achieve optimal service life and operation of your system.

Get a quote for service with maintenance

Extend the life of your unit with service checks

We are proud of the long lifespan of our systems, and recommend that you view a service agreement with regular service checks as insurance. Insurance for an extended lifespan of your system, and against unexpected repair costs for your elevator, platform lift, freight lift, stairlift, or handicap lift.

By signing a service agreement that includes safety inspections and maintenance, you are guaranteed that your system will be inspected at least 4 to 12 times a year, depending on the regulations of the Danish Working Environment Authority. This way, it is possible to perform general preventive maintenance such as lubrication of the system, as well as catch minor repairs that require replacement of spare parts before the damage develops into a major repair.

Modernisering & Opgradering af Hydro-Con elevator og lift anlæg.

Modernization & Upgrades

Developments within the elevator and lift industry are constantly changing. Therefore, it may be a good idea to modernize your system at some point to, for example, save on electricity, noise, etc.

Reparationer & Support på Hydro-Con elevator og lift anlæg.

Reparation & Support

We know it's never convenient when an elevator or lift is out of service and needs repair. That's why we handle repairs quickly and efficiently.

Inspections & Checks

As a manufacturer of elevators and lifts, we know all components down to the smallest detail. Therefore, we can quickly dispatch the right spare parts from our warehouse.

MADE IN DENMARK

We are a Danish manufacturer of elevators and lifts, we guarantee value for your investment.

HIGH QUALITY

We have quality, it has been proven though many years in the market and throughout the lifespan of the products.

+35 YEARS EXPERIENCE

HYDRO-CON was founded in 1988, and today every tenth unit in Denmark is a HDYRO-CON unit.

DURABLE SOLUTIONS

Our lifts are uniquely developed in and for the Nordic climate, unlike most products on the market.